You're region is set to UK (Global)
Postsaver Logo
Shop Now
Postsaver Logo

Postsaver Rot Protection: Guaranteed Long Life Posts*

Pro-Wrap post rot protectors guarantee your posts against ground-line rot and decay, the number one cause of fence & gate post failure.

Postsaver Guarantee Sticker

Postsaver Rot Protection Range

Each rot protection variation utilises the same proven and guaranteed dual-layer rot prevention technology.

Postsaver Posts

UC4 Preservative Treated Post With Rot Protection Pre-Applied
Available In
4” x 4”
100 x 100mm
8ft (2.4m)6ft (1.8m)
4” x 4”
100 x 100mm
8ft (2.4m)
6ft (1.8m)
3” x 3”
75 x 75mm
8ft (2.4m)6ft (1.8m)
3” x 3”
75 x 75mm
8ft (2.4m)
6ft (1.8m)
Shop Now

Pro-Wrap

For All Standard Round & Square Post Sizes
Wrap, peel stick and shrink onto your posts with a hot air gun or blowtorch
Pro-Wrap's Fit
3” x 3” – 8” x 8”
75 x 75mm – 200 x 200mm
3” – 10”
75 x 250mm
Shop Now
Postsaver Pro-Wrap rot protector

Pro-Wrap & Tack

For Odd Sized Posts & Sleeper Protection
Staple, wrap, staple and shrink onto your posts with a hot air gun or blowtorch
Pro-Wrap & Tack Fits
All Post Sizes
All Post Sizes
Shop Now

Watch To Learn More About Why Wooden Posts Rot

Wooden fence and gateposts rot at the ground-line section because of oxygen, fungi & moisture in the soil.

Used, Supplied & Trusted By
Network Rail Logo
Bradfords Logo
Jewson Logo
Travis Perkins Logo

Postsaver Rot Protection

Postsaver post rot protector’s exclude all the factors required for decay, locking preservative in and moisture, oxygen and fungi out. Preventing costly ground-line rot in your wooden posts.
Dual-Layer Rot Prevention Technology
Independently Tested & Proven Over 20+ Years
20 Year Post-Replacement Guarantee

Postsaver's Three Step Protection Process

1. Enable Dual-Layer Barrier
Postsaver Pro-Wraps feature a dual-layer barrier protection system, that creates a long-lasting air and water-tight seal around the post
2. Locks In Preservative
This dual-layer seal ensures that over the post’s life the wood preservatives are locked inside the post and do not leach out over time.
3. Lock Out Causes Of Decay
The dual-layer seal also locks out all the factors required for decay to occur including moisture, fungi and oxygen at the critical ground-line (up to 6” or 150mm below ground) of the post.
Application

How Easy Is It To Apply Protection?

All you need is a 2KW+ Hot Air Gun or gas blowtorch, and a foam roller if you’re applying to square posts (stapler + knife required for Wrap & Tack). Postsaver rot protected posts are suitable for installation with fence post concrete.
1. Measure Hole Depth
2. Position on the post & heat shrink on
3. Install the post in all the normal ways

Apply Yourself Or Buy Posts With Protection Pre-Applied

Delivered straight to your door, ready for installation. Free delivery.
Postsaver pre-protected timber fence post
3 x 3” Postsaver Timber Post
Rot Protection Pre-Applied
Available in 1.8m or 2.4m lengths
Tested & proven Pro-Sleeves pre-applied
Guaranteed against ground-line rot for 20 years
2 ft burial depth
High quality UC4 preservative treated post
3 x 3” Square
Postsaver pre-protected timber fence post
4 x 4” Postsaver Timber Post
Rot Protection Pre-Applied
Available in 1.8m or 2.4m lengths
Tested & proven Pro-Sleeves pre-applied
Guaranteed against ground-line rot for 20 years
2 ft burial depth
High quality UC4 preservative treated post
4 x 4” Square
Not ready to buy yet? Join our community!
Discount code doesn't expire. All customers are eligible (excludes trade).

Postsaver’s Dual-Layer Barrier – Explained

Postsaver’s dual-layer barrier system comprises of a tough, outer polythene skin coated in a bituminous inner sealant.
When heated (during product application), two things happen:
1
The inner sealant melts and penetrates into the surface of the wood
2
The outer polythene barrier shrinks down on-top to add a second layer of protection
This process creates an air and watertight seal to the posts surface which locks in preservatives and locks out three decay causing factors; Fungi, Oxygen & Moisture.

What Can I Use Post Rot Protection For?

Fences
Decking
Play Equipment
Gateposts

20 Year Post Replacement Guarantee

Thanks to Postsaver’s Dual-Layer barrier and our 20+ years of outstanding independent test data we have the confidence to offer a 20 year post replacement guarantee.
How to enable your 20 year post replacement guarantee
1
Correctly apply a Postsaver rot protector to any new UC4 or above preservative treated fence post
2
Correctly install the post in the ground with a minimum of 2 inches (4 cm) visible above ground

Who Can Use Postsaver?

Anyone installing wooden fencing can benefit from 20 year guaranteed fence post protection by choosing Postsaver, take a look at some of our customer’s images below
Postsaver Is Guaranteed For 20 Years
What Do Our Customers Say?

Frequently Asked Questions

Why doesn’t the protector cover the bottom of the post?

Beyond 15 cm or 6 inches below ground there is not enough oxygen to support the decaying organisms and fungi. Coupled with temperatures below 10°C means that these decaying organisms are unable to survive and rot cannot occur.

Can I install rot protected posts with fence post concrete?

Yes. All posts that have our rot protectors applied to them can be installed in all the usual ways - including installation with fence post concrete.

How do you know Pro-Wrap rot protection works?

Our confidence comes from our zero failure, 20-year independent field test data conducted by the BRE, Europe's largest and leading timber test organisation. With millions of rot protectors sold to over 30 countries worldwide over the last 26 years, our product is proven in volume use, and our test data confirms this.

How do you apply rot protectors? Can I apply them myself?

Yes. All you need is a blowtorch or 2KW+ hot air gun and if applying rot protectors to a square post, a foam roller. All application equipment is available to purchase from us directly.
View Application Instructions

Buying Options

Apply Yourself & Buy Direct

Click Here To Buy Pro-Wrap & Tack

Or – Find A Fencing Contractor

Search Our Approved Installers
Use our search to find a local fencing contractor or landscaper to fit Pro-Sleeves as part of your next project
Search For A Local Contractor
Click Here To Find A Local Stockist
Postsaver Logo
Postsaver manufactures and supplies guaranteed post rot protection that is proven to extend the life of wooden fence and gate posts. Our patented rot protection is independently tested and proven in volume use since 1994.
You're viewing the UK/Global site
Newsletter
Join our community and get 10% off your first order
North America (Trade Inquiries)
Copyright © 2024 Postsaver Europe Ltd. All rights Reserved.
*When applied to posts that meet the requirements of BS8417:2012 - UC4 (Use Class 4). See guarantee for details
**Based on not having to replace your fence in 10 years time due to post failure.


Postsaver uses long term independent test data on the effectiveness of barrier sleeves and wraps to reach all the conclusions given on this website (test data available on request). Based on this data, Postsaver believes longer life, maintenance of strength over time, improved safety and reliability, extended inspection periods and reduced maintenance requirements are reasonable claims. This is subject to Postsaver products being correctly applied as per our instructions and used on correctly preservative treated (for long term in-ground use - use class 4 or higher) wooden fence posts that are free of decay at the time of rot protection application. The claims made, real or implied are not warranties. It is the responsibility of the user to evaluate and satisfy themselves that the performance of the product meets their specific safety, reliability, extended inspection, repair and any other performance or cost-benefit criteria before using Postsaver rot protectors
cartphone-handsetcrossmenuarrow-right linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram